Had a few questions from viewers on how to get water. Went up this weekend and concentrated on filming footage of the water system.
We occasionally pump water from a freshwater lake to the cabin. Maybe once during each 3 days stay. The cabin/cottage is on a remote mountain lake and doesn’t have access to grid electricity.
The biggest obstacle was pumping the lake water up a 80 foot (24 meter) hill and into 110 gallon (250 litre) water barrel on the roof. The water then travels by gravity feed down through 1/2″ PEX pipe and to the kitchen tap.
Since I could not find a suitable electric pump, decided to go with a gas. Went through two pumps, the first, a 3.5 HP model had problems priming and pumping the water up the hill. It was returned to Princessauto.com and picked up a 6.5 HP 3″ water pump. The pump was super powerful and pretty good on gas. Only needs to be refueled once a season (May – Nov). At 3/4 throttle, it will fill the water barrels in 4 minutes.
Went with a 1.5″ PVC pipe. The water flow of a 1.5″ to a 2″ is minimal. It was easier to find fittings for the common 1.5″ PVC pipe. Check with an irrigation or hardware dealer. The overall cost of the project was $293.00.
Would prefer to go with an electric pump, but it was difficult to find a pump that could pump at least 80 feet vertically, run off DC and is affordable. Personally, I would prefer a quieter system, but, for the last 3 years it has worked fine. Maybe when the pump dies, I’ll switch to a torpedo submersible DC pump ($300.00).
But the long and short of it is we now have running water in the kitchen. Much easier than hauling buckets of water up the hill. Plus the spouse is happy too!
The next projects is to install a small pump and a water filter.
Feel free to comment!